12
Manual instruction
EN
Switching on and off
Before connecting the device to the electric power
supply, make sure that the main supply voltage is
230V/50Hz.
(CED-3,6)
Switching on:
To switch the machine on, press the forward/reverse
power switch (9) in “ ” or “ “ position depending
to the rotation you need. (fig. 1A)
Switching off:
Release the forward/reverse power switch (9).
(CED-3,6L)
Switching on:
Select the rotation you need by pulling the forward/
reverse switch (4); then press and maintain the on/
off switch (6). (fig.1B)
Switching off:
Release the on/off switch (6).
fig.1A - fig.1B
Operating instruction
Recharging the battery
(CED-3,6)
Plug charger plug into a suitable mains socket
1.
and plug the output cord of the charger into the
socket (8) of the screwdriver.
After charging 5 hours, the battery will be fully
2.
charged. At this time, unplug the charger plug from
the wall socket: the screwdriver is ready to use.
(CED-3,6L)
Plug charger plug into a suitable mains socket
1.
and plug the output cord of the charger into the
socket of the screwdriver, at this time the red
charging indicator (3) will illuminate.
After charging 3 to 5 hours, the battery will be
2.
fully charged. When fully charged, the green light
will be on and the red light will be off. Unplug the
charger plug from the wall socket, the screwdriver
is ready to use.
WARNING: when charging, the charger
and screwdriver may become warm to
the touch, this is normal and does not
indicate a problem.
Fitting and removing bits
To use any of the bits supplied, insert the bit into the
chuck and push it into the chuck as far as possible.
To remove the bit, simply pull it out of the chuck.
NOTE: if using a short bit always use a
magnetic bit holder (fig.2)
fig.2
Manteinance and storage
Before carrying out any maintenance
operation, turn off the electric power
supply by disconnecting the plug from
the extension cable.
Always keep the machine and the ventilation
•
slots cleaned. If the machine should fail despite the
rigorous manufacturing and testing procedures, the
repair should be carried out by an authorized IVT
customer service.
Regular cleaning and maintenance of the
•
appliance will ensure efficiency and prolong the life
of your appliance.
Keep all nuts, bolts, and screws tight, to be sure
•
the appliance is in safe working condition.
Replace worn or damaged parts for safety.
•
Store the appliance in a dry room out of reach of
•
Summary of Contents for CED-3,6
