manualshive.com logo in svg

IVT Airbox E 130-170, Installer'S Manual, Page: 37 / 64

Share
Download
IVT Airbox E 130-170 Installer'S Manual Download Page 37

Basic principles of operation

AirModule –6 720 813 268(2014/10)

37

10.3

Using the service menu

Opening and closing the service menu

Navigating the menu

Change settings

Confirm or ignore a change

Quick start process

If the display is turned off, it will turn on when a key is 
used and a function executed. Quickly press the selector 
to turn on the display. If you don't use any keys, the 
display will turn back off.

Opening the service menu

▶ Keep the menu key pressed down until the service menu 

appears.

Closing the service menu

▶ If there is no open submenu, you can return to the standard 

display by pressing the Return key.

-or-

▶ Press the Return key and keep it pressed down for a few 

seconds to return to the standard display.

Table 14  

▶ Turn the selector to highlight a menu or an item.

▶ Press the selector.

The menu or the item is displayed.

▶ Use the Return key to go back one step in the menu.

Table 15  

Selection

▶ Turn the selector to highlight a post.

Slide bar

▶ Turn the selector to set the value between the min. and max. 

value.

&

Selection with slide bar

 (the slide bar is visible on the display)

▶ Turn the selector to highlight a post.
▶ Push the selector to confirm the selection.

The input window and the slide bar are active.

▶ Turn the selector to set the value between the min. and max. 

value.

Multiple selection

▶ Turn the selector to highlight a post.
▶ Press the selector to select the post.
▶ Press the selector again to cancel the selection.
▶ Repeat the steps until you have selected desired posts.

Time program

▶ Turn the selector to highlight a switching time or an 

associated operating mode.

▶ Press the selector to activate the input window for switching 

time or operating mode.

▶ Turn the selector to modify the setting value.

Table 16  

menu

menu

menu

Confirm a change

&

▶ Push the selector to activate the highlighted post or confirm 

the change.

▶ Turn the selector to highlight 

Continue

 and press the 

selector.
The display returns to the menu one level up. The user 
interface operates with the modified setting.

Ignore a change

▶ Press the Return key to ignore a change.

Table 17  

Activate Quick start

▶ Open the service menu.
▶ Press the menu and info key until a popup window appears 

on the display.
The heat pump as soon as there is a heating or DHW need.

Return to the service menu

▶ Press the selector.

The menu or the item is displayed.

Table 18  

menu

menu

menu

menu

menu

info

Summary of Contents for Airbox E 130-170

































































Reviews:

No comments