Ivoclar Vivadent Programat CS4, Operating Instructions Manual

Page: 21 / 36

21
Settings Display Short Description
Reset to factory
settings With this setting
option, all the values
and parameters can
be reset to the
original factory
settings.
Note : All the individ-
ual programs that
you have generated
and saved will be
deleted by this
function
Important information
For certain settings, the user code (359) is required.
* Some programs are protected by a code. If changes are necessary, the corresponding code
is provided.
5.6.2 Information
By pressing the Information key (81), you will reach the information
screen (the last selected information is displayed). The cursor keys
(79, 80) can be used to toggle between the possible information.
This screen can be left with the ESC key (71) or one of the program
keys (82, 83, ...).
Information Display Short Description
Serial number Serial number of the
furnace
Software version
Furnace head
Firing hours
Furnace operating
hours
Latest start of the
calibration program
UTH Date of latest
calibration of the
temperature required
for crystallization.
Latest start of the
calibration program
MTH Date of latest
calibration of the
temperature required
for sintering.
Calibration value UHT Calibration value at
880°C/1616°F. The
value is displayed in
accordance with the
selected temperature
mode in °C or °F.
Calibration value
MHT Calibration value at
1500°C/2732°F. The
value is displayed in
accordance with the
selected temperature
mode in °C or °F.
Information Display Short Description
Mains voltage Shows the current
mains voltage
Error list Enables the display of
the latest error
messages.
5.7 Explanation of the display symbols
Symbol name Meaning Symbol
Open furnace head Shown in the
recommendation area,
where the next most likely
action is suggested.
Close furnace head Shown in the
recommendation area,
where the next most likely
action is suggested.
Press START Shown in the
recommendation area,
where the next most likely
action is suggested.
Press STOP Shown in the
recommendation area,
where a possible action is
suggested.
Press ENTER Shown in the
recommendation area,
where a possible action is
suggested.
Press ESC Shown in the
recommendation area,
where a possible action is
suggested.
Use cursor keys Shown in the
recommendation area,
where a possible action is
suggested.
Use – / + keys Shown in the
recommendation area,
where a possible action is
suggested.
General write
protection Shows in the parameter
list that the general write
protection for all programs
has been activated by
means of the user code.
Individual write
protection active Shows in the parameter
list that the individual
write protection for this
program is active.
Individual write
protection not active Shows in the parameter
list that this program is
not write-protected.