Ivoclar Vivadent Programat CS4, Operating Instructions Manual

Page: 20 / 36

20
5.6 Settings / test programs and information
By pressing the Settings key (78) you will reach the setting screen
(the latest setting selected will be shown).
The cursor keys (79, 80) can be
used to toggle between the
possible settings. This screen can
be left with the ESC key (71) or
one of the program keys (82,
83, ...).
5.6.1 Settings / test programs
Settings Display Short Description
Contrast The contrast can be
adjusted with the -/+
keys.
Temperature unit The -/+ keys are used
to toggle between °C
and °F.
Language selection Enables the language
selection.
Temperature
calibration UTH With this program,
the temperature
calibration program
for the crystallization
temperature range
can be started.
See Chapter 7.6
Temperature Calibra-
tion for more details.
Temperature
calibration MTH With this program,
the temperature
calibration program
for the sintering tem-
perature range can
be started. See Chap-
ter 7.6 Temperature
Calibration for more
details.
Volume The desired volume
can be set using the
-/+ keys
Melody The desired melody
may be set using the
-/+ keys
Programming Enables the
programming of the
parameters for the
currently selected
program *
Settings Display Short Description
Renaming Enables the renaming
of the currently
selected program *
Enables the renaming
of the material *
Time The time can be set
using the -/+ keys
Date The date can be set
using the -/+ keys
General write
protection Enables the activation
or deactivation of the
general write
protection by means
of the -/+ keys after
entering the user
code. The write
protection covers all
programs
Heater test program Enables a check of
the heating system
Keypad test Enables a check of
the membrane-sealed
keypad
Cleaning program With this program,
the heating elements,
including the
insulation materials,
can be cleaned by
means of a heat
process
Protocol Enables the creation
of protocols of
programs
Start delay Activating this
function enables the
delayed start of
programs
Optical Status Display With this menu item,
the Operating Status
Display can be
activated/deactivated
Service reminder Turn service reminder
off or set new
reminder
in 12 months