Ivoclar Vivadent Programat CS4, Operating Instructions Manual

Page: 10 / 36

10
2.1.6
Contraindication
Never use the furnace without the sin-
ter tray. Use only the original Programat
sinter tray. Do not use the firing trays
or honey-combed trays from conven-
tional ceramic furnaces. Furthermore,
check the sinter tray for damage,
cracks or contamination before every
program start. If the sinter tray is
damaged, it must no longer be used.
A maximum of one sinter tray is to be
placed in the sintering chamber. Do not
stack the sinter trays.
2.1.7
Contraindication
Sinter trays must not be placed in the
area surrounding the firing plate, since
this will obstruct the closing of the
furnace head.
2.1.8
Contraindication
Foreign objects must not be placed on
the furnace head or the air vents.
Make sure that no liquids or other
foreign objects enter the air vents,
since this may result in an electric
shock.
2.1.9
Contraindication
Make sure that no liquids or other
foreign objects enter the furnace.
2.1.10
Contraindication
Do not insert any foreign objects into
the air vents. There is a risk of electric
shock!
2.1.11
Burn hazard
Never place objects in the hot firing
chamber by hand, since there is a burn
hazard. Always use the sinter tray fork
supplied for this purpose. Never touch
the hot surface of the furnace head, as
there is a burn hazard. Please also
observe the warnings on the furnace.
2.1.12
Risk of crushing / burn hazard
Never reach under the furnace head
with the hand or other parts of the
body during operation, since there is a
risk of crushing and a burn hazard.
2.1.13
Risks and dangers
This product contains ceramic fibres
and may release fibre dust. Do not use
compressed air or blow on the
furnace, thus distributing the dust in
the environment, and observe the
additional notes on page 11.
2.1.14
Risks and dangers
Do not use the furnace without spacer,
since the distance to the back wall has
to be kept!
2.1.15
Risks and dangers
The furnace must not be operated if the heating element
in the sintering chamber is damaged. There is a risk of
electric shock upon contact with the heating wire.