45
5.4.2 Information
To reach the screen for the furnace information, scroll to page 3 in the home screen and press the
[Information]
touch
button.
Example: Displaying information
1. Open information
Scroll to page 3 in the home screen and press the
[Information]
button.
2. Read information
The information is displayed on several pages. The
[Arrow]
buttons
are used to scroll to the next information page.
The following information can be read off:
Serial number
Serial number of the furnace.
Software version
Currently installed software version of the furnace. Software updates are available from
www.ivoclarvivadent.com/downloadcenter
Last calibration
Date of the last calibration
Mains voltage
Currently measured mains voltage
Last dehumidification
Date of the last dehumidification of the furnace
Operating hours
Number of operating hours
5. Operation and Configuration
Testing push notifications
Here, push notifications for communicating with the Programat app can be tested. The Programat app
must be linked to the furnace to test push notifications. If the network has been set up correctly, a push
notification will appear on the Programat app. If no notification appears on the app, please check the
network settings.
Touch mode
Setting the sensitivity of the touch screen. Select “Special” in case of malfunctions when operating the
touch screen.
Setting option: Normal / Special
Keypad tone
Here, the keypad tone can be activated.
Setting option: On / Off
IoT function
The IoT function can be activated and deactivated here. Moreover, the connectivity status is indicated.
In addition, the time zone can be set in this section
To return to the home screen, press either the touch but-
ton
[Home]
in the navigation bar or the HOME key on the
membrane-sealed keypad.
