27
c) Free, individually adjustable programs on a USB stick
In a first step, a USB stick must be prepared as program memory (see Chapter 5.4). The programs are designed in such a
way that they can be either used as conventional, one-stage programs, or as two-stage programs, if required. The
programs and program groups can be individually named.
In case of software updates, individually changed parameters in free programs are NOT reset to the factory
settings or changed!
5.2.2 Program selection
The program selection requires only few steps:
1. Select program type.
3. Select the program.
4. Start program or edit program parameters.
The firing program can now be started or, as an alternative, the
program parameters can be changed.
2. Select program group.
Quick program selection
Pressing the P key switches to the program screen of the current program. When the program screen is shown, pressing
the P key again switches to the quick program selection by means of number entry.
5. Operation and Configuration
