- 12 -
Wall Bracket Installation Dimensions
B. Use an electrical drill to make four holes for M6 screws on the above-drawn positions, and drive in the expansion M6
screws;
C
．
Fix the installation board of the bracket firmly on the wall with four M6 screw nuts and washers.
D. Push the power cable, communication cable and video cable through the bracket tube, then push the installing port on
the top of the outer housing into the installing hole of the bracket, tighten the 3 M6 screws and fix well. Make sure the M6
screws just fit in the screw slot of the installing port of the housing. (See the picture below)
E. Put the power adaptor into the wall bracket and pin the power adaptor with the adaptor pinning board, lest the power
adaptor slides out. (See the figure below)
