- 9 -
through adjusting the focal length. In the default Auto-focus, Auto Iris state, following the movement of the pan/tilt, the lens
will quickly adjust itself to get clear image according to the change of the object.
3. Automatic Adjustment of Focal Length/Movement Speed
When the focus is long and the unit is in under manual operation, due to the high sensitivity of the IR Low-speed
Dome Camera, even the slightest movement of the joystick would make the image move quickly, which causes image
losses. Based on human design, the unit can automatically adjust the horizontal and vertical moving speed of the pan/tilt
according to the current focal-length, which makes the manual target-tracing operation much easier.
4. Color/B&W auto conversion
Designed for round-the-clock (24hours a day) monitoring. In the daytime, the image is color, well, at night, it automatically
turns to Black&White, at the same time, the IR Lamp is turned on.
5. Configure and Invoke Preset Positions
The preset position function works in this way: the IR Low-speed Dome Camera saves the parameters of the current
pan/tilt angel and zooming ratio of the lens under a representing number, quickly invoke those parameters when needed,
the unit will turn to the corresponding position and be adjusted to corresponding zooming ratio. The user can quickly and
conveniently invoke the preset position with the controlling keyboard. The IR Low-speed Dome Camera supports 64
preset positions.
6. Automatic Tours
The automatic tour function is a built-in function of the IR Low-speed dome camera. According to actual requirement,
the user can arrange the preset positions into the automatic tour in the desired order, then, the user can use such
equipment as controlling keyboard to make the IR Low-speed dome camera automatically move as per the order of the
preset positions set in the tour with stipulated time intervals.
● Automatic tour among preset positions can be realized through grouping together the preset positions into the tour.
● The tour order is programmable. The staying time at each preset position can be configured.
● Sixteen preset positions can be stored in one tour. Altogether 4 tours can be configured with the speed dome.
7. Left & Right Scan
Left/right limiting positions can be set through controlling keyboard, and the IR Low-speed Dome Camera can
automatically scan horizontally between the left limiting position and the right limiting position, at the pre-set speed.
8. 360º Scan
360º Scan is available with the IR Low-speed Dome Camera. After adjusting the vertical angle and the zooming times
well, the user can run the 360º endless Scan through invoking easy command.
9. Default Position Function
The unit supports default position function. The user can configure default position for a key monitoring area
according to actual conditions. If not operated after 2 minutes, the IR Low-speed Dome Camera will automatically turn to
the default position and monitor.
10. Power-off Operation resuming function
If the unit is carrying out Preset Position, Default Position, Left & Right Scan, Tour, 360º Scan etc functions, when the
power is off, then, when the power is on, the unit will resume carrying out the functions after it finishes the self-examining.
11. Control the lens of the Camera Module
Focal Length Control
