Ivation IVAPAC12BTU User Manual Download Page 7

7

OPTIONAL SECURITY BRACKET INSTALLATION

CONTROL PANEL OVERVIEW

Your window kit also includes an optional security bracket that can be installed to prevent the window from being 
opened from the outside while the window kit is in place. 

To install the security bracket, fasten it to the window with a type B screw as shown, depending on the type of window.

1. 

POWER:

 Press the POWER button once to manually turn the portable air conditioner on. Press it again to turn 

 

the unit off. 

2. 

MODE:

 Press the MODE button to cycle through the different mode options. The corresponding indicator LEDs 

 

will then light up on the control panel. The available modes are as follows: Air Conditioning mode (

COOL

), Fan 

 Only 

mode 

(

FAN

), Dehumidifier mode (

DRY

), Sleep mode (

SLEEP

), and Auto mode (

AUTO

). 

 

NOTE: The exhaust hose and window kit must be installed in order to use the unit in air conditioner, dehumidifier, 

 

auto, and sleep modes. When using this device in fan-only mode, however, the window kit is not required.

3. 

TEMP:

 Set your desired temperature by pressing the 

+

 or 

 buttons while the unit is in air conditioning mode. 

 

The temperature indicator LED will flash the temperature while it is being adjusted, and then steadily display the 

 

temperature at which it is set until you change it. 

 

NOTE: The temperature will be displayed in degrees Fahrenheit. To switch between Fahrenheit and Celsius, press 

 

and hold the 

+

 and 

 buttons for three (3) seconds while the unit is plugged in but not powered on. 

4. 

FAN SPEED:

 Press the 

FAN SPEED

 button to cycle between the three fan speeds: high, medium, or low. The 

 

corresponding indicator LEDs will light up.

 

NOTE: When the unit is in dehumidifier mode, the fan speed cannot be changed; when Turbo Cool mode is activated, 

 

the fan speed will automatically be set on high and cannot be changed during that time.

Single/Double Hung Windows

Sliding Windows

Security bracket

Type B 
screw

Security 
bracket

Type B screw

Sleep Mode
Indicator

 

 

Fan Speed
Indicators

 

 

Auto Mode
Indicator

 

Air Conditioner 
Mode Indicator  

Fan Mode 
Indicator  

Power
Indicator

 

 

Bucket Full
Indicator

 

 

Turbo Cool
Indicator

 

 

Timer

Indicator

 

Dehumidifier 
Mode Indicator

 

 

5

2

3

4

6

1

Summary of Contents for IVAPAC12BTU















Reviews: