10
Dehumidifier Mode
IMPORTANT: This unit will not perform in dehumidifier mode when the room temperature is below 50°F (10°C).
1. Install the exhaust hose and window kit properly. (See pages 5–6)
NOTE: This step is required in order for the air conditioner to function.
2. Plug the power cord into an electrical outlet.
3. Press
the
POWER
button to turn on the unit.
4. Press
the
MODE
button until the dehumidifier mode indicator (
DRY
) lights up on the control panel display or
the remote LCD screen.
5. The temperature display will display the temperature of the room.
NOTE: The unit operates at a default fan speed setting of LOW while in dehumidifier mode. A slight cooling of the
room during the dehumidifying process is normal and expected. To aid the effectiveness of the process, keep
doors and windows closed while the unit is removing moisture from the room.
Auto Mode
This mode will cause the unit to automatically activate air conditioning mode whenever the room
temperature rises above 72°F (22.2°C), and switch to fan mode once the room temperature drops
below 72°F.
1. Install the exhaust hose and window kit properly. (See pages 5–6)
NOTE: This step is required in order for the air conditioner to function.
2. Plug the power cord into an electrical outlet.
3. Press
the
POWER
button to turn on the unit.
4. Press
the
MODE
button until the auto mode indicator (
AUTO
) lights up on the control panel display or the remote
LCD
screen.
Sleep Mode
In sleep mode, the fan will run on LOW to keep noise at a minimum, and the set temperature will gradually
increase to 2°F above the temperature you originally set during the first two hours. After two hours, the
unit will then continue to operate at the same temperature until sleep mode is deactivated by pressing
the
SLEEP
button again.
1. Install the exhaust hose and window kit properly. (See pages 5–6)
NOTE: This step is required in order for the air conditioner to function.
2. Plug the power cord into an electrical outlet.
3. Press
the
POWER
button to turn on the unit.
4. Press
the
MODE
button until the sleep mode indicator (
SLEEP
) lights up on the control panel display or the
remote
LCD
screen.
Fan Mode
NOTE: It is not necessary for the exhaust hose and window kit to be installed to operate this unit in fan mode.
1. Plug the power cord into an electrical outlet.
2. Press
the
POWER
button to turn on the unit.
3. Press
the
MODE
button until the fan mode indicator (
FAN
) lights up on the control panel display or the remote
LCD
screen.
4. Set the desired fan speed by pressing the
FAN SPEED
button on the control panel to cycle between speed
options, or by pressing the
FAN HIGH
/
FAN MED
/
FAN LOW
buttons on the remote control.