manualshive.com logo in svg

ITW FOXJET Solo 45 Series, Operation Manual, Page: 59 / 69

Share
Download
ITW FOXJET Solo 45 Series Operation Manual Download Page 59

 

Thermal Jet

Appendix J: Bulk Ink Supply

Thermal Jet Operations Manual Rev M 

Page 54

Appendix J: Bulk Ink Supply

Wear safety goggles when working with industrial 

inks and solutions!

WARNING: Disconnect power during installation.

CAUTION: Sudden impact to the installed print head 

(caused by moving the conveyor with the print system 

attached or moving the print system from one location to another) can cause ink to 

seep out the front of the print cartridge. To keep this from happening disconnect 

septum fitting, remove print cartridge, and depressurize the bulk ink supply before 

moving the print system.

CAUTION: Failure to properly bleed the air from the ink lines before connecting the 

septum fitting to the print cartridge could damage the print cartridge.

System Components

•

Print Head

•

Regulator

•

Bulk Ink Supply

•

Controller or PC (Handheld controller requires the optional Hub (below))

•

Beacon (optional)

•

Hub (optional)

Installation

1. Mount the print head(s), bulk ink supply, and controller (if applicable). Note: The bulk

ink supply can be a maximum of three feet above or below the print head(s). The
regulator must be mounted on the same horizontal bar as the print head. See page
64 for print down application.

Print Head

Regulator

For the system to function properly it is critical that the regulator
be positioned appropriately in relation to the print head as shown.

1-1/4"±1/8"

!

!

Summary of Contents for FOXJET Solo 45 Series






































































Reviews:

No comments