Thermal Jet
Thermal Jet Operations Manual Rev M
Page 10
Step 7: Configure the Print Head
Set the number of print heads, identify their positions relative to the controller, and select
the appropriate print head type by touching each one and then the drop down box.
Print head setup complete. Next, select the Encoder tab, and choose the desired encoder
type.
Auto Speed Detect:
Line speed
automatically
detected via print
head photo cells.
External Encoder:
Line speed measured by
an externally mounted
encoder and connected
to the last print head in
the daisy chain
Touch this
box, then type
in the desired
speed
On the home screen, press the
Control Panels
button, and then press the
System Setup
button. On the
Print Heads
page press the
Redo Print Head Setup
button. Select the
desired direction.
Fixed Speed:
User types in the
desired line speed
