ITW FOXJET Solo 45 Series Page 13 Operation Manual Download

Page: 13 / 69

Thermal Jet

Thermal Jet Operations Manual Rev M

Page 8

Power

CAUTION: Power should be disconnected from the print head prior to connecting or dis-

connecting any external device, including: PC, controller, or print head daisy chain cables.

Electrical arcing may occur if external cabling is connected or disconnected while power is

supplied to the unit.

Install the power plug from the previously mounted

power supply into the power jack on the rear of

each print head.

Press and hold the "PURGE" button on the rear of

the print head while slowly moving a piece of

paper, cardboard, or comparable material in front

of the Print cartridge. Print several purge images

and validate that all channels are printing. If not,

refer to “Section 4: Maintenance & Shutdowns” on

page 26.

The power supply for the controller or the com-

puter may now be installed.

Serial Port Setup

NOTE: Depending on GUI / Controller status, this step may already be complete.

If a computer will be used, install the PC software

included with the print head. Follow the installation

prompts, and at this prompt, select "Interface 1

Serial Print Head".

After the GUI program has been installed, launch

the program.

Ensure the home screen menu is present via the

Hide Menu

Show Menu

button, and

then press the

Control Panels

button.

NOTE: Do not rub the print cartridge face with

the print sample material as this will scratch

the orifice array and affect print quality.

Summary of Contents for FOXJET Solo 45 Series






































































Search results

Summary of Contents for FOXJET Solo 45 Series

Reviews:

Related manuals for FOXJET Solo 45 Series

Brands by name

Popular brands

ITW FOXJET Solo 45 Series, Operation Manual

Search results

Summary of Contents for FOXJET Solo 45 Series

Reviews:

Related manuals for FOXJET Solo 45 Series

Brands by name

Popular brands