ITW Diagraph IJ3000, Operation Manual, Page: 89 / 94

Integrated Valve
Appendix G: Testing an Electrical Outlet
5760-107 Operations Manual Rev C Page 81 of 86
Appendix G: Testing an Electrical Outlet
An outlet tester is the preferred method of checking an electrical outlet, although a voltme-
ter can also be used.
BACKGROUND INFORMATION ABOUT AC WIRING
Equipment running at 115VAC must have one hot wire and one neutral wire. Additionally, a
separate ground wire runs to non-current carrying parts of most loads.
THE WIRES IN AN AC OUTLET (115VAC)
*The service equipment is defined as "the equipment used to disconnect the entire building
and overcurrent device to protect the entire installation, but not the branch circuits individu-
ally."
At the service equipment, a single ground wire connects both the neutral and ground to
earth. The NEC calls this wire the "ground electrode conductor."
WIRE DESCRIPTION FUNCTION
LINE Usually black. Cannot be white
or green. Carries the live voltage and current to
the equipment.
NEUTRAL White or natural gray. Grounded at the service equipment*
only. Serves as the return for 115 volts.
GROUND Bare, green, or green with yel-
low stripes. May be metal armor
or metal conduit. Grounded at the service equipment*
and every metal box or cabinet. Runs to
non-current, carrying parts of most
loads.
115VAC
HOT NEU
GND
0V 115VAC
115VAC
115VAC 0V
0V
115VAC 115VAC
CORRECTLY WIRED
OUTLET
INCORRECTLY WIRED
HOT AND NEUTRAL
REVERSED
INCORRECTLY WIRED
HOT AND GROUND
REVERSED