manualshive.com logo in svg

ITW Diagraph IJ3000, Operation Manual, Page: 39 / 94

Share
Download
ITW Diagraph IJ3000 Operation Manual Download Page 39

 

Integrated Valve

Section 4: Installation

5760-107 Operations Manual Rev C 

Page 31 of 86

Defining Print Head Properties

The final step in print head configuration is defining the properties of the individual print
heads. 

Beginning with print head number one and working in numerical order, you will need to
define the following: 

•

Print head type:

 A list box shows the types avail-

able, including 9-dot 1/2"; 9-dot 7/8"; 18-dot 1", and
18-dot 2". 

•

Product sensor offset:

 Enter the distance between

the photosensor and the print head, in inches. This
may need to be fine-tuned after print setup. The max-
imum sensor offset is 81". 

After a print head's properties are defined, touch the

Next Head

 button to move to the next one; or just touch

a print head on the display to highlight it. Repeat this pro-
cess for each print head in your daisy chain until all
heads have been defined. 

After the last print head is defined, touch the 

Done

 button to display the following screen.

Print Head setup is now complete. 

Touch any print head on the display to review or change the properties for that head. Touch
the

 Redo Print Head Setup

 button to repeat the setup procedure using the new setup as

the default. Touch 

OK

 to return to the 

Home Screen

.

Summary of Contents for Diagraph IJ3000































































































Reviews:

No comments