ITW Diagraph IJ3000, Operation Manual, Page: 38 / 94

Integrated Valve
Section 4: Installation
Page 30 of 86 5760-107 Operations Manual Rev C
Specifying Number of Print Heads
Touch the up/down arrows to set the
number of print heads on each side of
the conveyor. The illustration at the top
of the screen will automatically change
to reflect your choices. In the example at
right, four print heads have been speci-
fied on the near side and two on the far
side of the conveyor. Touch the
Next>
button.
Setting Daisy Chain Order
All six print heads are displayed, and you
are prompted to indicate the first print
head in the daisy chain by touching it.
The "grayed-out" heads are not eligible
as they are in the middle of the chain. (If
there is only a single print head, this step
is bypassed.)
NOTE: The first print head in the daisy
chain should be the top print head in your
system, as this one will be printing the
top line of data and will be the first one
for which you are prompted to enter data.
In the example at right, you have chosen
the far left print head on the near side as
the first in your daisy chain. The rest of
the print heads on this side have been
assigned numbers automatically, and
you are now prompted to indicate which
of the print heads on the far side is the
last in the chain. (Depending on the con-
figuration, this step may be bypassed.)
Once this is done, the
Print Head Prop-
erties screen appears.