ITW Food Equipment Group VULCAN V Series, Operation Manual

Page: 7 / 32

– 7 –
INSTALLATION CODES AND STANDARDS - ALL BROILER MODELS
Your broiler must be installed in accordance with:
In the United States:
1. State and local codes.
2. National Fuel Gas Code, ANSI/Z223.1/NFPA #54 (latest edition). Copies may be obtained
from The American Gas Association, Accredited Standards Committee Z223 @ 400 N.
Capital St. NW, Washington, DC 2001 or the Secretary Standards Council, NFPA,
1 Batterymarch Park, Quincy, MA 02169-7471.
NOTE: In the Commonwealth of Massachusetts, All gas appliances vented through a
ventilation hood or exhaust system equipped with a damper or with a power means of
exhaust shall comply with 248 CMR.
3. Vapor Removal From Cooking Equipment, NFPA #96 (latest edition). Copies may be
obtained from The National Fire Protection Association, Batterymarch Park, Quincy MA
02169-7471.
4. National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from
The National Fire Protection Association, Batterymarch Park, Quincy, MA 02169-7471.
In Canada:
1. Local codes.
2. CSA B149.1 Natural Gas and Propane Installation Code.
3. CSA C22.1 Canadian Electrical Code (latest edition). The above are available from The
Canadian Standard Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario,
Canada L4W 5N6.
BROILERS MOUNTED ON CASTERS
Broilers mounted on casters must use a flexible connector (not supplied by Vulcan) that complies
with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69 • CSA 6.16 and a
quick-disconnect device that complies with the Standard for Quick -Disconnect Devices for Use
With Gas Fuel, ANSI -Z21.41 • CSA 6.9. In addition, adequate means must be provided to limit
movement of the appliance without depending on the connector and the quick-disconnect device
or its associated piping to limit appliance movement. Attach the restraining device at the rear of
the broiler.
If disconnection of the restraint is necessary, turn off the gas supply before disconnection.
Reconnect this restraint prior to turning the gas supply on and returning the broiler to its
installation position.
Separate instructions for installing casters to the broiler are included with the casters.
Note: If the broiler is installed on casters and is moved for any reason, it is recommended that the
broiler be re-leveled front to back and side to side.