ITT ICM, Installation And Operating Instructions Manual, Page: 14 / 34

Installation and Operating Instructions
Model
ICM, ICMP
,
oil bath lubrication
9330-051-en
Revision 14
TM 6099 MPE/Wm
Page 5
Date 24/08/2011
1.2 Tightening torques
Screws greased, tighten in diametrically opposite se-
quence
Housing screws 901/3
Pump size No. x size Nm
Group 1
40-25-160 8 x M12 48
50-32-160 8 x M12 48
65-40-160 8 x M12 48
80-50-160 8 x M12 48
40-25-200 12 x M12 48
50-32-200 12 x M12 48
65-40-200 12 x M12 48
80-50-200 12 x M12 48
Group 2.1
100-65-160 12 x M12 48
125-80-160
12 x M12
48
100-65-200
12 x M12
48
125-80-200
12 x M12
48
125-100-200
12 x M12
48
Group 2.2
40-25-250
8 x M16
119
50-32-250
8 x M16
119
65-40-250
8 x M16
119
80-50-250
8 x M16
119
100-65-250
8 x M16
119
125-80-250
8 x M16
119
50-32-315
16 x M16
119
65-40-315
16 x M16
119
80-50-315 16 x M16 119
Pipe screws, flanges to DIN/ISO
DN No. X Size Nm
25 4 x M12 12
32 4 x M16 18
40 4 x M16 22
50 4 x M16 30
65 4 x M16 40
80 8 x M16 25
100 8 x M16 40
125 8 x M16 55
Impeller nut 231
No. X Size Nm
Group 1 1 x M12x1,5 35
Group 2 1 x M16x1,5 70
Plain bearing cartridge screws 901/1
3 x M8 12 Nm
1.3 Type plate, dry-running, CE
and housing markings
The stainless steel type plate is firmly riveted to the
bearing pedestal:
If the operator attaches his identification, it must be
ensured that the pump matches the application in
question.
Example of type plate:
CE-marking:
When CE applies
When CE & ATEX
applies
Housing identification:
The following are visible on the housing according to
DIN EN 19:
♦
Nominal size
♦
Rated pressure
♦
Housing material
♦
Manufacturer's identification
♦
Melt number/Foundry identification
♦
Foundry date