5
3. System Design
Note
Systems MUST be designed by qualifi ed technicians only and meet all applicable state and local
code requirements.
The following fi gures show a typical constant pressure system using the AquaBoost
II
Controller. Connection
can be made directly to a water supply or water can be drawn from a supply tank. Figure 1 shows a typical set
up for a supply tank fed by a well.
Figure 2 shows a set-up for boosting the pressure of an existing water supply. Both confi gurations allow pump
maintenance without main line shut-off.
Note
Fittings and valves are not included with AquaBoost controllers.
Figure 1
System Layout
for supply tank
Home Supply
Water Main
Check Valve
Isolation Valves
Unions
Check Valve
To Drain
Relief
Valve
Gauge
Tank
AquaBoost
Controller
Circuit
Breaker
Disconnect
Transducer
Motor/Pump
Home Supply
Well Supply
Check Valve
Isolation Valves
Unions
Check Valves
To Drain
Relief
Valve
Gauge
Tank
AquaBoost
Controller
Circuit
Breaker
Disconnect
Atmospheric
Storage Tank
Transducer
Motor/Pump
Figure 2
System Layout for
municipal hook-up