Itronix X-C 6250 Pro, User Manual

Page: 144 / 173

144
X-C 6250 Pro User’s Manual
79-0003-003 22 October 1999
Display
•
Change the color scheme. From the Start Menu select Settings,
Control Panel, choose Display, and then click the Appearance tab to
make changes to the color scheme.
•
Make the online hypertext jumps black by adding the line
JumpColor=0,0,0 to the [Windows Help] section of WIN.INI.
The display goes “squiggley wiggley” after removing/inserting the
battery
•
This can occur if you attempt to turn on the unit with a low or
depleted battery. Restart the unit by pressing and holding down both
mouse buttons for at least 10 seconds and then releasing the
buttons. Connect external power and recharge the battery.
I can’t see the cursor while using the DOS editor
•
Press
FN+INSERT
to change from insert mode to overwrite mode to
enable a block cursor. When it defaults to insert mode, the DOS
editor uses an underline cursor which is less visible than the block
cursor for overwrite mode.
The display appears to have random pixels darkened after
scrolling
•
Contact your supervisor or your organization’s help desk for
information about correcting this problem.
I changed my display resolution, but I see no difference on the
screen
•
Try restarting your computer by pressing
CTRL+ALT+DEL
for the
changes to take effect.
CAUTION Restarting your computer while you are running appli-
cations or while you are working Windows may corrupt files or data.