received with the card for storage and care information.
72_0111_007
13 February 2004
© 2003-2004 Itronix Corporation. All rights reserved.
Customizing Your BIOS Settings
This chapter explains how to use the Setup Utility to modify the BIOS
settings. The Setup Utility displays and allows modification of the GoBook
Tablet PC components and the configuration of devices that are connected
to it. This information is used to test and initialize components at start-up
time and to make sure everything runs properly when the system is
operating.
The BIOS is installed with a set of default values. You may be able to
increase system performance by changing some of the timing values in the
Setup Utility, but this can be limited by the kind of
hardware
you are using.
In certain circumstances, the system may generate an error message that
asks you to make changes to the CMOS settings using the Setup Utility. This
happens when the system finds an error during the POST (Power On Self
Test) that it carries out at startup.
CAUTION It is not recommended that you change any settings since this
may cause the unit to not function properly.
If you are not sure how to configure the BIOS settings we suggest that you
load optimal defaults by selecting that option on the Exit Menu or by
selecting F9 on the
popup input panel
.
Using the BIOS Setup Utility
The BIOS Setup Utility allows you to configure your computer’s basic
settings. When you turn your computer on, the system reads this
information to initialize the
hardware
The electronic components, boards,
peripherals, and equipment that make up your computer system. so that it
can operate correctly. You can use the BIOS Setup Utility to change your
computer’s start-up configuration. For example, you can change your
system's security routine.
GoBook® Tablet PC Help
Page 39 of 64
GoBook Tablet PC Help
2/23/2004
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~...
