13 February 2004
© 2003-2004 Itronix Corporation. All rights reserved.
Display
The display performance is slow
n
The temperature may be too cold. Move the computer to a warmer
operating environment.
I can’t read the display
n
Adjust the brightness level up by pressing
FN+Rotate
and adjust it
down by pressing
FN+Security
.
n
Your display may be off. Tap your
pen
on it once.
n
If that doesn't work the automatic power-saving mode may have shut
off (suspended) the computer. Press the power button to resume.
The underlined, inverse, and hypertext characters are difficult to read on
the screen
n
Change the color scheme. From the Start Menu select the Control
Panel. Choose Display and then tap the Appearance tab to make
changes to the color scheme.
I can’t see the cursor while using the DOS editor
n
Press INSERT on the input panel to change from insert mode to
overwrite mode and to enable a block cursor. When it defaults to insert
mode, the DOS editor uses an underline cursor which is less visible
than the block cursor for overwrite mode.
The display appears to have random pixels darkened after scrolling
n
Contact your supervisor or your organization’s help desk for
information about correcting this problem.
I changed my display resolution, but I see no difference on the screen
n
Try restarting your computer for the changes to take effect.
GoBook® Tablet PC Help
Page 55 of 64
GoBook Tablet PC Help
2/23/2004
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~...
