HANITO
USER´S MANUAL
Page -4-
10.
The weighing system operator should not start any load motion until he makes sure that the load has
been safely fastened and no one is in the risk area.
11.
Before every load motion the weighing system operator must make sure that the rated load of the
weakest elements of the entire load fastening system (load housing elements, fasteners, carrier
elements) has not been exceeded.
12.
The weighing units must be checked for proper attachment of all individual parts (shackle, load
hooks) particularly for proper seating of all cotter pins.
13.
Should the weighing unit operator detect any visible defects, he must remove them immediately. If
this is not part of his responsabilities or he is not sufficiently qualified, if required, he must switch off
the device and notify the employer of the defect.
