English
22
Code 1625186897- Edition 7/2019
——
Alarm
：
Early warning, the fault light flashes; fault shutdown, fault lights lit, clear fault, reset off.
3
、
Display of status and operations
The display screen will be as follow when the units are powered on:
After power on,
screen
show this page
After 5 seconds, the main page will show up as:
Main page
Press shift button, the main page will show up as:
Main page
Press “Move down button” to enter into Menu Selection Interface:
Level 1 menu screen
Level 1 menu screen
4
、
Operating parameters
Press “Move down button” or “Move up button” to move the black cursor to “RUN PARA.”, press
enter button to pop up submenu:
Continuously press “Move down button” you can see run parameters and run state parameters
as follows:
Fan current, Total run time, Total load time, This run time, This load time,Oil filter time, O-a
filter time, Air filter time, Lube time, Grease time, Belt time……etc.
5
、
User Parameter (Customer Parameter):
In primary menu,, press the move button to move the black slider to the "USER PARA" menu,
press the shift button to switch to the following menu:
In this menu, Press shift button
，
Switch to the following interface requirements to enter a user
password
SCREW
COMPRESSOR
PRES: 0.60MPa
SYS STOP C01
RUN PARA.
USER PARA.
MOTOR(A) A-0100
B-0100 C-0100
TEMP: 80
℃
SYS STOP C01
FACTORY PARA.
MOD PARAMETER
LOAD PRES:
00.65MPa
PASSWORD:0***
