37
ä Attention
!
Make sure to replace the gasket correctly and undamaged!
h) Tighten the upper part with the 5 EPP screws.
i) Reconnect the channels.
j) If necessary, also install the condensation drain.
k) Bring the ventilation unit back under tension.
e) Place the cables correctly in the recesses.
f) Mount the electronics compartment and screw the
cover plates back onto the compartment.
g) Mount the upper part with the gasket.
ä Attention
!
Make sure that the right module is placed back in the right
place: the cables of the supply module are marked M1 and the
cables of the drain module are marked M2. The enclosure is
also marked M1 and M2 are marked (2x).
Summary of Contents for HRU 400
Page 1: ...Itho Daalderop HRU 400 Installation use A...
Page 2: ...Original document...