ITGate TGM220 User Manual Download Page 26

51

50

4. Settings and Operations

Expert Setup

Communication Setup  

Sets up appropriate network environment. Go to Communication Setup.

IP: Enter the Host IP-Address.   

Netmask:  Enter the Netmask to find a Host IP-Address in its Subnet. 

LAN: Connection to the home Network. Default is LAN. 

Nameserver

Enter the DNS-Server IP-Address to switch a Domain name to an IP-Address.  

Gateway: Enter the Router’s IP-Address 

Enable Network: Press the [OK] button to enable the Network (a check/tick

will appear in the checkbox). Default is disabled. 

Port 80: Enter a Port of your choice to configure the HTTP Port for the

receiver Web Interface. Default is Port 80.

4. Settings and Operations

4. Settings and Operations

Once you setup Parental lock, you can lock/unlock any item in Service List.
Press MENU on  Service List to enter  service menu and then you can see new
option “lock”.

Go to the option “lock”/“unlock” and press the [OK] button to lock/unlock the

selected service. Beside the selected service appears the Symbol for a locked

service.

If you want to view/unlock this service next time you select it, you will be asked

for the PIN. Enter the PIN to view/unlock this service. After unlocking the Service,

the Symbol for a locked service will disappear.

Note
Set a check to DHCP and press the [OK] button to avoid duplication to assign an IP-
Address which the receiver is using. 

Summary of Contents for TGM220
































Reviews: