
4. Settings and Operations
37
36
4. Settings and Operations
4. Settings and Operations
The same functions can be applied inside a Bouquet. Press the [EXIT] button
to exit.
❖
Satellite Installation & TP Edit
Satellite Tuner
❖
Satellite Configuration
Explained in previous menu, “4.2 Get started for the first time”.
❖
Satfind
Choose from the lower dropdown lists your preferred satellite and transponder.
Adjust the dish towards the desired satellite until you have a high level of Signal
strength AGC and on the Signal quality SNR indicator. The BER should always
indicate a value of zero if the Satellite is locked and synced.
SNR: Signal to Noise Ratio. This Indicator shows the Quality of the Signal.
AGC: Automatic Gain Control. This Indicator shows the Strength of the Signal.
BER: Bit Error Rate. This Indicator shows the Errors Rate of the Signal.
❖
Edit Bouquets
Rename the selected Bouquet Type by pressing the [YELLOW] button.
Choose a Bouquet Type you wish to edit a Bouquet from and press the [OK] button.
If you go into Bouquet, you can edit.
Press the [RED] button to delete a selected Bouquet.
Press the [GREEN] button to highlight a B o u q u e t and direct it to another
place in the list. Press the [GREEN] button again to release.
Press the [YELLOW] button to rename a selected Bouquet.
Press the [BLUE] button to set a marker between two Bouquets. A marker is
used to place visual remarks. You can create as many markers as you want.
Summary of Contents for TGM220
Page 1: ...Digital Multi Broadcasting Receiver TGM220...
Page 31: ......