manualshive.com logo in svg

ITGate TGM220, User Manual, Page: 22 / 31

Share
Download
ITGate TGM220 User Manual Download Page 22

4. Settings and Operations

43

42

4. Settings and Operations

4. Settings and Operations

❖

Manual Transponder Scan

The Manual Transponder Scan is recommended for scanning a specific

Transponder that has not been found during Automatic Transponder Scan.

Press the [OK] button on the upper dropdown list and choose the appropriate

satellite, press the [OK] button again to select.

Type in the correct Transponder values in its fields. Press the [GREEN] button to

start scan. The scan results will be shown in the next window.

❖

Satellite Installation & TP Edit

Cable Tuner

Explained in previous menu, “4.2 Get started for the first time”.

❖

Automatic Multisat Scan

The  Automatic Multisat Scan is recommended for scanning all configured

satellites at once.

By pressing the [OK] button on each satellite a determined number of times, you

set the scan method. First pressing : nothing, satellite will not be scanned /

Second pressing : all services will be scanned / Third pressing : only free services

will be scanned / Fourth pressing : nothing, again

Press the [GREEN] button to start scan. The scan results will be shown in the

next window.

Summary of Contents for TGM220
































Reviews:

No comments