ITGate TGM220, User Manual, Page: 23 / 31

4. Settings and Operations 45 44 4. Settings and Operations
4. Settings and Operations
Use either the Navigation-Buttons [LEFT] and [RIGHT] or [OK] button to
change or set the values.
Color Format: CVBS (FBAS), RGB (Red, Green, Blue separated), SVideo
(Color- and Brightness signal separated) and YPbPr
(Component signal e.g. for Projectors).
Aspect Ratio: 4:3 letterbox (standard), (16:9 programs will be displayed on 4:3
TV’s with black beams at top and bottom ), 4:3 panscan (16:9 programs will be
zoomed to full high on 4:3 TV’s, parts of the picture on the left and right side
will cut off), 16:9 (programs transmitted in 16:9 will be displayed automatically
in 16:9, on 4:3 TV’s the picture will be reduced in height)
TV System: PAL, PAL+PAL60, Multinorm and NTSC Select the Norm your
TV supports. We suggest to choose Multinorm.
Disable WSS on 4:3: Set a check into the Checkbox to disable zooming on
some 16:9 TV’s during 4:3 transmissions.
AC3 default output: If a program is transmitted with an AC3 Audio-Track (e.g.
Dolby Digital), the receiver switches automatically to this Audio-Track. The
AC3 Signal will only be available at the optical socket.
The receiver doesn’t have a built-in Dolby Digital Decoder, AC3 signals are not
available on the analogue socket and therefore you need an external Dolby
Digital Amplifier to adjust the Volume.
Auto VCR switching : Activating this function (standard) switches the Video
signal from the VCR socket to the TV. Depending on the used VCR, switching
takes affect by turning on the VCR or starting playback.
Press the [GREEN] button to save.
System Setting
❖
Time Setting
Explained in previous menu, “4.2 Get started for the first time”.
❖
A/V Setting