ITGate TGM220 User Manual Download Page 25

49

4. Settings and Operations

Parental Lock

Locks services of your choice under the Service list against access. Setup lock is

used to lock the Menu (6) Setup against access.

The Parental setup requires a four digit code of your choice called PIN for

Parental lock and Setup lock.

To enable Parental lock, set a check in front of “Parental lock”. The Button

change PIN” appears and press the [OK] button to enter a PIN of your choice.

Re-enter the PIN.

If you don’t want to see locked services inside the Service List, set a check in

front of “Hide locked services”.

To disable Parental lock, uncheck the checkbox from “Parental lock” and enter

the PIN to verify.

Press the [OK] button to save.

Follow same process for setup lock.

Loosing this PIN requires a “Flash Erase” of the Operation System to
reset to factory default.

48

4. Settings and Operations

4. Settings and Operations

Change skin : Sets a new skin. A skin changes the appearance of the OSD.    

Navigate to a skin of your choice and press the [OK] button to activate. The    

receiver will ask you to restart the operation system to apply the new skin.

TuxText position : Sets the TuxText position. The clock or the Text pages may

not in the middle of the screen.

Press the [RED] button to move the top left point of the rectangle.

Press the [GREEN] button to move the bottom right point of the rectangle.

Use the Navigation buttons [DOWN/RIGHT] for the top left rectangle and

[UP/LEFT] for the bottom right rectangle to adjust. Press the [OK] button to exit.

Press [GREEN] button to save or [OK] on save menu.

OSD Language

Select your language here. Please refer to “4.2 Get started for the first time”.

If you don’t see any rectangle, then they are out of range. Please
adjust the rectangle into the middle of the screen. 

TuxtText is Plugin(additional Software). You need to refer to your
local dealer to enjoy various Plugins for the receiver.

Summary of Contents for TGM220
































Reviews: