MULTISPLIT / PA-CONTROL / ZONE-MIX 4/8 DIGITAL
www.itec-audio.com
MULTISPLIT / PA-CONTROL / ZONE-MIX 4/8 DIGITAL
PART 1: HARDWARE MANUAL
CONTROL AND DISPLAY ELEMENTS ON FRONT PANEL
Multisplit 4/8 digital
PA-Control 4/8 digital
Zone-Mix 4/8 digital
1) Power LED
5) Device status LED
2) LED display
6) Rotary switches A+B
(Zonemix)
3) Rotary switches
7) 8 × input selector
(Zonemix)
4) PC connection port
8) 8 × input LEDs
(Zonemix)
1. Power LED
A red LED indicates that the correct operating voltage is applied.
2. Multifunction LED display
Depending on the configuration, the eight LEDs can have one of the following functions (for
information about configuring the LEDs, see the software manual).
Off:
LED display is disabled.
Signal:*
Input signal at the corresponding input (post-fade) is higher than –60 dB.
Comp:*
Indicates compressor/limiter activity at the corresponding input.
Signal:*
Input signal at the corresponding input (post-fade) is higher than +3 dB.
Value:
Level indication for an input or output (each LED corresponds to 20 dB).
*
For the inputs for which “Automixer” has been selected the LEDs indicate the status (the active
channel(s)).
6
