MULTISPLIT / PA-CONTROL / ZONE-MIX 4/8 DIGITAL
www.itec-audio.com
MULTISPLIT / PA-CONTROL / ZONE-MIX 4/8 DIGITAL
Configuration switching with BCD switch
BCD switch
9. Media remote control port
This is a 9-pin sub-D plug on the device back, labelled “RS-232 Remote”.
2 RxD
3 TxD
5 GND
7
8
Settings:
Baud rate: 19200
Data bits: 8
Parity: None Stop
bits:
1
The protocol for communication with a media remote control device is described in the
appendix of the software manual.
10. Analog link
This RJ45 socket on the device back, labelled “LINK IN”, can be used to quickly connect the
device to the four bus signals of an
ITEC Multi-Mix
. The four analog inputs of the LINK IN
socket are connected in parallel with the XLR socket inputs. If you are using the LINK IN
socket, do
not
use the XLR sockets (see block diagram on p. 14).
11
