The figure below shows how to perform the one-time setup of the Subway
reporting features. Enter your Franchise Number and the AM/PM target times
for taking the temperatures that should appear in the Subway Temp Log reports.
Temps do not need to be taken precisely at these specified target times.
They
may be taken at any time during the AM and PM. The target times entered here
are used by the software to select between multiple Temps taken for a particular
product during the AM or PM. In this case, the temperature closest to the target
time is used for the report.
© 2015 ITD Food Safety Inc.
6
Enter your target times
for the AM & PM Temps
Enter your Franchise #
Subway reporting is set up in
General Settings
Printing tab
If this section is missing, refer to
the document entitled
A Guide to
Upgrading to the Subway Edition
