Access to the software may be restricted to regular users by enabling PINs in
the General Settings
Security Options tab. For more information see
document
T3UPSW
Using PINs With Subway Edition
.
The very tip of the probe contains the temperature sensor. Therefore, when
probing a product, make sure the
tip
of the probe is inside the product. If the
tip exits the product on the other side, the temperature measurement may
not be accurate.
Target an area of the product close to the bottom of the food pan.
If an initial product Temp is
slightly
Out of Range, try waiting a few seconds
and then selecting REMEASURE without moving the probe from its position. If
it’s still Out of Range, try probing a different area of the product.
Do not use the probe as a general tool or an icepick, as this may cause
damage.
You may use rechargeable batteries in the Temp-Taker® 3 handheld device.
Always follow standard industry battery care instructions:
◦
Do not mix
alkaline batteries with zinc carbon or rechargeable batteries.
◦
Replace
all batteries
at the same time.
◦
Remove fully discharged batteries
immediately
.
© 2015 ITD Food Safety Inc.
17
