ITC DOSTEC-AC, Original Manual

Page: 26 / 60

Set the volume of product
dosed for each pulse.
Set if the output pulse is the same as the input.
With this option a second Dostec AC can be driven by the same
flowmeter in proportional (%) mode.
With this option another device can receive the volume dosed. Check 5.5.4 for the connection.
Set if the 4-20mA Output is the same as 4-20mA Input, or manual config
Set the % flow where it will emit 20mA
Set the % flow where it will emit 20mA
4.2.4.3 Pulse output
Configuration of the volume/pulse to monitor the pump flow
4.2.4.4 4-20mA output
4-20mA output to monitor.
ENT
PULSE OUTPUT
Out = Pulse In
4-20mA OUTPUT
Out = In4-20mA
PULSE OUTPUT
Out =
021 1/pulse
Dosed Vol
PULSE OUTPUT
Out =
019 1/pulse
Dosed Vol
FLOW DETECTOR IN
Strokes Pump 010
ENT
x2
ENT
CONFIGURATION
SET UP
IN / OUT
PUMP CALIBRATION
DOSING MODE
INPUTS
PRESSURE
FLOW DETECTOR
OUTPUTS
PULSES
4-20mA
ENT
4-20mA OUTPUT
4mA 004%
ENT
x2
ENT
CONFIGURATION
SET UP
IN / OUT
PUMP CALIBRATION
DOSING MODE
INPUTS
PRESSURE
FLOW DETECTOR
OUTPUTS
PULSES
4-20mA
20mA 096%
Change values with and confirm with
ENT
Change values with
and confirm with
ENT
Change values with and confirm with
ENT
Change values with and confirm with
ENT
Set the number of cycles of the pump without detecting any
pulse to activate the alarm.
%
l / h
0 0 0
0 0 0
MODE
0240
%
l / h
0 0 0
0 0 0
MODE
0240
Out = % Flow
26