31
Operation
With this option another device can receive the dosed volume. Review 5.5.4 for connections.
5.2.4.4 4 - 20 mA output
4 - 20 mA output for log or monitoring.
x2
ENT
ENT
CONFIGURATION
SET UP
IN / OUT
PUMP CALIBRATION
DOSING MODE
PULSE OUTPUT
Out =
021
1/pulse
Dosed Vol
PULSE OUTPUT
Out =
019
1/pulse
Dosed Vol
INPUTS
PRESSURE
FLOW DETECTOR
OUTPUTS
PULSES
4-20mA
ENT
4-20mA OUTPUT
Out =
In4-20mA
4-20mA OUTPUT
4mA
004%
20mA
096%
Out =
% Flow
%
l / h
0 0 0
0 0 0
MODE
25.0
5.2.5. Maintenance
In the Maintenance menu, the status of components subject to wear
can be viewed using the status bars.
A warning will appear on the main screen at the end of the useful life
of a component.
The status bars in the maintenance menu show the remaining life of
each component and display a
!
when the bar VAC, with this being
the recommended time to replace the component.
You can view the cycles completed by selecting each component. A negative cycle value indicates
that it has exceeded the maintenance interval.
off
l
l / h
M
%
0.00
82.4
MAINTENANCE
VALVES
DIAPHRAGM
BELLOW
MAINTENANCE
VALVES
DIAPHRAGM
BELLOW
!
Enter the volume of product dispensed
for each product.
Change by pressing
and confirm by pressing
ENT
Set whether the pulse output is the same as the pulse input.
Change by pressing
and confirm by pressing
ENT
Enter the % flow rate at which the 4 mA will be emitted
Enter the % flow rate at which the 20 mA will be emitted
Change by pressing
and confirm by pressing
ENT
Create Flow
[email protected]
www.createflow.cz
Distribuce Create Flow
tel: +420 722 712 652
