ITB ATLAS 1000 AR144 Manual For Systems And Procedures Download

Page: 10 / 41

Reference Manual ATLAS 1000 AR144 Page

Italian Technology of Broadcast

FRONT PANEL

GRID

Ventilation grid for RF Pallet

DISPLAY

Display for device functions

STOP BUTTON

STOP Button

START BUTTON

START Button

LED SWR

Alarm LED for Reflected Power

LED PWR

Alarm LED for Direct Power

LED TEMP

Alarm LED for overheating

LED ENAB

ENABLE LED

LED ON AIR

Transmission LED

10.

LED ST.BY

Stand‐By LED

FUNCTIONS DESCRIPTION:

SWR LED:

Flashing

: indicates it is limiting the output RF power in order to reduce the reflected one.

Constantly

: indicates reflected power is more than 12% of the device’s rated power.

PWR LED:

Flashing

: indicates the device is limiting the output power to maintain the nominal value.

Constantly

: indicates the output power value is higher than the nominal one.

TEMP LED:

ON Constantly

: indicates the internal temperature of the device or of the pallets is higher than the

device’s parameters.

ENABLE LED

ON Constantly

: indicates the device has removed the pallet enabling voltage.

ON AIR LED

Flashing

: indicates the device is in transmission but does not detect the output power.

Constantly

: indicates the device is detecting the output power.

STAND BY LED

: indicates the device is in Stand‐By.

STOP BUTTON:

By pressing the button, the device will go in stand‐by mode and the pallet will

remove auxiliary output

power from the device.

START BUTTON:

By pressing the button, the device will set the pallet in transmission mode and auxiliary output power will
be supplied.

Summary of Contents for ATLAS 1000 AR144










































Search results

Summary of Contents for ATLAS 1000 AR144

Reviews:

Related manuals for ATLAS 1000 AR144

Brands by name

Popular brands

ITB ATLAS 1000 AR144, Manual For Systems And Procedures

Search results

Summary of Contents for ATLAS 1000 AR144

Reviews:

Related manuals for ATLAS 1000 AR144

Brands by name

Popular brands