ITB ATLAS 1000 AR144, Manual For Systems And Procedures

Page: 22 / 41

Reference Manual ATLAS 1000 AR144 Page 22 of 41
Italian Technology of Broadcast
USER PROGRAM
The end user can modify some parameters of the device without affecting the proper functioning of the such as: clock, language and
the name that appears on the display when the appliance is in standby mode. To do this, the following procedure must be followed.
With PTT at rest, keep the button pressed stop until the display shows:
P A S S W O R D :
Now enter the password using the following sequence:
• Press the "stop" button three times
• Press the "start" button three times
Note that each time a button is pressed, the " " symbol appears on the display to confirm the occurrence
insertion.
If the wrong sequence is carried out, the message appears on the display
P A S S W O R
D :
E R R O R
After a few seconds the message to enter the password will reappear on the display and then repeat the
sequence.
When the correct password is entered the message appears on the display
U S E R
P R O G R A M
P R E S S
S T A R T
After pressing the start button the message appears on the display
P R O G R A M M I N G
U S E R A B I L I T A T I O N