– 35 –
3.6 PLU
OPERATIONS
3.6.1 S
WAP
M
ANUAL
/ A
UTOMATIC MODE
(SHIFT
KEY
)
The selection Manual/Automatic let you choose the way of printing.
Manual:
to have a label printed you must validate it by PRINT key.
Before each printing the message on display will be:
Label Composed:
PRINT or ESC ?
Press PRINT key to print or ESC key to abort.
Automatic:
printer prints automatically as soon as all variable fields have been composed.
The Manual / Automatic selection can be done from PLU main menu: each time you press SHIFT
key you’ll see the second letter on the first line of display changing between “M” and “A”.
________________________________________________________________________________
3.6.2 PLU
SELECTION
Each PLU can be choosen and activated from PLU main menu.
The message on display will be:
0123 DAP 7.50
Ham steak
(PLU main menu )
There are 2 ways to select and activate PLU:
1. Using UP and DOWN arrow keys to increase or decrease (step of 1 unit at a time) the number
of PLU. If you press up/down arrows key and display doesn’t change it means that new number
of PLU doesn’t exist.
2. Writing manually the number of PLU using numeric keys and validating it by ENTER key. If
new number of PLU doesn’t exist you’ll see the message:
Press any key to go back to main PLU menu.
If you enter a valid PLU number you may see the message:
The second line, while saving goes on, will be completely filled with ‘>’ characters.
When saving has finished the display will go back to main PLU menu.
WARNING !!
PLU Out of Range
Saving Memory…
>>>>
