– 16 –
2.7 MENU
KEY
:
GENERAL WORKING PARAMETERS
When printer is working in standard programming mode, if you press MENU key you’ll be able to
set all printer general working parameters. They are:
Serial port BAUD RATE
Serial port Parity
Serial port Data bit number
Serial port Stop bit number
Media to use: Labels, Tags or Continuous Paper
Label taken photosensor: On / Off
Preprinted Labels: Yes / No
Y Gap (at the end of printing in label mode)
Transmission of character SUB (1A Hex = 26 Dec) at the first status request after power on
Macro Interpreter: On / Off
National character Set (USA, Italy, Sveden, Norway, France, German, UK)
RTS control serial line level: Standard RS232 / Logically Inverted
Optoisolated input signal for Print Consent (Pick & Place)
Optoisolated output signal for Print End
Selection for type of paper sensor: fork or reflection (optional)
WARNING:
All parameters must be confirmed with ENTER key or aborted with ESC key.
When you press ESC key you are going to abort only the last parameter you see on display: the
previous already confirmed by ENTER are considered valid.
In the next pages you’ll find the description of each of above parameters.
