– 12 –
2.1 F1
KEY
: P
ROGRAMMED
D
ATA
S
TORING
During the standard mode, F1 key is used to store all programmed informations into printer
permanent memory (FLASH memory type).
While printer is saving data, it shows next message on display:
Saving Memory…
>>>>
The second line, while saving goes on, will be completely filled with ‘>’ characters.
The complete saving of memory takes about 12 seconds.
WARNING:
If during the data storing phase printer is turned off or there is a fall down of power line, it will be
necessary to program again printer by ETIK.
2.2 F2
KEY
:
SETTINGS OF
E
URO CHANGE AND ACTIVE
PLU
NUMBER
During the standard mode, F2 key let you set the correct change for EURO money.
Pressing F2 key you’ll see:
1 EURO = 1.00
New > _
The current change value is displayed. You can set another value by inputing it with numeric keys.
The decimal dot can be written keeping pressed the SHIFT key and pushing ‘
3YZ.
’ key too.
Press ENTER to validate new value, ESC to abort.
Next new display will appear:
Activate PLU n°:
xxx
Now it is possible to set a specific number of merceologic record (PLU).
Press ENTER to validate new record, ESC to abort.
New entered record will be automatically activated when you will enter the PLU mode.
If you have never programmed the merceologic database the default for this value is –1 (that means
no PLU stored).
