GENERAL DESCRIPTION
Due to its specific type of operation with direct and reflected radiation, this appliance permits
heating a surface of around 20/25 m2 (Fig. 2), naturally in environments with good fresh air ven-
tilation, for example: terraces, pergolas, restaurants, cafés and open-air installations (gardens,
pavements, etc).
The appliance is very simple to use and built according to CE safety standards. It has been
tested, approved and controlled by the Notified Approval Institute to which the Manufacturer has
always entrusted most of its certifications in the gas industry.
Types of installation:
- MOBILE, with the base free of restraints using the trolley (optional), with LPG fuel only (tank).
- FIXED, with the base fastened to the floor (this type of installation must be carried out only by
professionally skilled personnel), using Propane/Butane gas (large tank) or natural mains gas.
ASSEMBLY
Take all the parts making up the appliance out of the packaging, with special care given to the
burner unit (Fig. 3: 3, 4, 7, 9, 10).
Check the integrity and the conformity of the contents of the packaging (the latter must be
disposed of according to applicable regulations):
A - Mod. FALO’ with manual controls
- Appliance with carrying structure and special-glass pipe;
- Hose connection (make sure this complies with applicable regulations);
- Cover dish;
- Multilingual instruction booklet;
- Warranty Certificate.
B - Mod. FALO’ with Remote Control
- Appliance with carrying structure and special-glass pipe;
- Hose connection (make sure this complies with applicable regulations);
- Cover dish;
- Multilingual instruction booklet;
- Warranty Certificate.
IMPORTANT!
Always wear individual hand protection gear during appliance assembly and
positioning. Use the special accessory for moving (Fig. 3:18) to prevent cuts and burns.
21
FA L O ’
Summary of Contents for FALO 12 kW
Page 7: ...6 FALO Fig 10 1 2 2 Fig 11 Fig 12...
Page 43: ...39 FALO NOTE...
Page 44: ...3520300023 Rev 18...
