Use and Maintenance manual
21
5.2 Further maintenance
Any other procedures which have not been described in this manual must be carried out by
specialized technicians or alternatively contact the manufacturer’s service assistance.
Before carrying out any further maintenance operations make sure that the machine has been
disconnected from the main electrical supply.
GLASSES REMOVAL/REPLACEMENT
- Loosen the blocking screws of the glass by means of a screwdriver.
- Unscrew by hand, carefully, the lower screws first and then the upper screws, making sure the
glass is not vulnerable to any stress or blows that could cause its break.
- Where present remove and store the nylon washers placed in the inner part of the glass.
- If a glass has to be replaced, repeat the steps on backwards to install the new one.
INSULATING ROPE REPLACEMENT
Open the oven’s door and remove the insulating rope by extracting it from its location
- Clean the rope’s location by means of a damp cloth.
-
Carefully, insert the new insulating rope into its location , always starting from its lateral end.
