How to use
There are several ways to control the lever on SGZA10.
If SGZA10 is configured as a water keeper:
SGZA10 lever can be open or close through the remote controller.
Through the use of application software like ISysmart ZiG-BUTLER installed on a
computer/server, open or close instructions can be sent to and the device status can
be read and displayed.
On the fire event, the paired device sends command to water keeper and brings the
lever to ON position.
Manually release the lever lock button by pushing it inwards to release the lever so
you can move the lever either up or down.
If SGZA10 is configured as a gas keeper:
On the fire event, the paired device sends command to gas keeper and brings the
lever to down position.
Manually release the lever lock button by pushing it inwards to release the lever so
you can move the lever either up or down.
NOTE
: When the Manual Lever Releaser Button (lever lock button) keeps inwards as the
figure below, please slightly move the lever to release the button.
Permit to join
SGZA10 is featured to be a router in the network. It permits other devices to join the
network. By default the router device SGZA10 does not allow permit-to-join function in
normal operation to protect the network from unexpected or unauthorized join attempt.
You will need to open up the permit-join on SGZA10 to allow new devices (a router or an
end device) to join.
Operation:
