#18
iStorage datAshur
®
Personal
2
Manual – v 1.3
www.istorage-uk.com
D A T A A S S U R E D
25. How to configure the datAshur Personal
2
with Windows OS
In the event that hacking detection has been triggered by entering the
incorrect PIN 10 times
in succession or the drive
has been
reset
, all
data on the drive will be lost forever
. Once a
New User PIN
has been created, the datAshur
Personal
2
will need to be initialised and formatted.
To initialise your datAshur Personal
2
, do the following:
1. Unlock the datAshur Personal
2
by entering the
User PIN
and connect to a computer’s USB port.
Instructions
LED
LED State
1. Press and hold down number
7
(seven) button and then
press the KEY
button and release buttons
(
7
&
)
/
Red
and
Green
LED’s blink alternately
2. Within 10 seconds begin to Press the number
9
button
three times (triple click) (
999
)
/
Red
and
Green
LED’s continue to blink
alternately
3. Press and hold down number
7
(seven) button and then
press the KEY
button and release buttons
(
7
&
)
Red
LED fades out to complete the reset process
3. Proceed by clicking on
Format
disk.
Select
FAT32
or
NTFS
depending on your needs, enter a
Volume Label
and click
Start
.
2. The computer should notify the user with the following message:
24. Booting from the datAshur Personal
2
iStorage datAshur Personal
2
USB drives are equipped with a boot delay feature in order to accommodate power cycling
during a host boot process.
There may be occasions where you might want to boot from the datAshur Personal
2
for various reasons. When booting from
the datAshur Personal
2
, you are running your computer with the operating system that’s installed on the datAshur Personal
2
.
No special actions are required on the part of the user, and to use this feature, simply unlock the drive and connect to the USB
port of a host computer.
To force an immediate lock,
always
unplug to remove USB power to the datAshur Personal
2
.
