#13
www.istorage-uk.com
iStorage datAshur
®
Personal
2
Manual – v 1.3
D A T A A S S U R E D
#13
www.istorage-uk.com
16.
How to enable Read-Only in Admin mode
Instructions
LED
LED State
1. Unlock the datAshur Personal
2
with Admin PIN
Red
solid LED followed by a flickering
Green
LED indicating successful Admin PIN entry
2. Press the KEY button three times
(triple-click)
&
Green
and
Blue
LED’s flicker together
3. Within 10 seconds begin to press the number
7 (pq
R
s)
button followed by the number
6 (mn
O
)
button (
76
)
&
Green
and
Blue
LED’s continue to flicker
together
4. Press KEY button once
Blue
LED quickly fades out and
Green
LED con-
tinues to flicker. when the datAshur Personal
2
is
inserted into a USB port the
Green
LED blinks
every two seconds indicating the datAshur
Personal
2
is in Read-Only mode
17.
How to enable Read/Write in Admin mode
When Admin writes content to the datAshur Personal
2
and restricts access to read-only, the User cannot change this setting
in User mode. To set the datAshur Personal
2
to Read-Only, please follow the steps below.
Admin can override User set Read-Only by enabling Read/Write on the datAshur Personal
2
using the Admin PIN. To set the
datAshur Personal
2
to Read/Write, please follow the steps below.
15. How to verify whether an Admin/User PIN has been set up
1. Press KEY button once
Red
,
Green
&
Blue
LED’s will flash together once, then one of the following states occurs.
Only User/default PIN exists
Red
LED blinks
Only Admin PIN exists
Blue
LED blinks
Both User and Admin PIN’s exist
&
Red
and
Blue
LED’s blink together
The following table illustrates how to determine which PINs, User and/or Admin, have been set up.
With the datAshur Personal
2
in a locked state (all LEDs off), press the KEY button once.
Caution
:
Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately
once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 11.
Caution
:
Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately
once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 11.
