#15
www.istorage-uk.com
iStorage datAshur
®
Personal
2
Manual – v 1.3
D A T A A S S U R E D
#15
www.istorage-uk.com
19.
How to set the Timeout Lock in Admin mode
Instructions
LED
LED State
1. Unlock the datAshur Personal
2
with Admin PIN
Red
solid LED followed by a flickering
Green
LED indicating successful Admin PIN entry
2. Press the KEY button
3
times
(triple click)
&
Green
and
Blue
LED’s flicker together
awaiting new instructions in OPTIONS mode.
3. Within 10 seconds begin to press button number
8
(
T
uv)
followed by the number
5 (jk
L
)
button
- (
85
)
&
Green
and
Blue
LED’s continue to flicker
together
4. Press KEY button once
Blinking
Green
LED
5. Within 10 seconds begin to enter the length of User
Timeout in 2 digits:
00 = 0 minutes (default)
01 = 1 minute
99 = 99 minutes etc
Green
LED continues to blink
6. Press the Key button once
LED changes to flickering
Green
. Timeout Lock
has been set. Admin can override USER Timeout
Lock
To protect against unauthorised access when the datAshur Personal
2
is connected to a host and unattended, the
datAshur Personal
2
can be set to automatically lock after a pre-set amount of time.
In its default state, the datAshur Personal
2
Timeout Lock feature is turned off. The Timeout Lock feature can be set to
activate (lock) anywhere between 1 and 99 minutes. Admin Timeout Lock settings will override User settings.
To set the Timeout Lock please follow steps in the table below.
Caution
:
Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately
once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 11.
