SAFETY RULES
ADDITIONAL SAFETY STANDARDS RELATIVE TO THE LAWS OF EACH COUNTRY
INFORMATION
»
The safety standards described here shall be further adapted to meet the specific legal
requirements of each country where the equipment is installed.
WA R N I N G
»
The wash facility must have the pre-treatment infrastructure required by standard UNE EN
858.1 and 858.2, as described in the civil works book ref.
»
If there is a direct connection to the public drinking water supply, the laws relating to
prevention of water returned to water networks, public or private, must be observed.
»
Average use of the electricity supply must not vary ±10% from the nominal voltage, according
to IEC standard 38, equivalent to UNE 21301.
»
The legal regulations in force in each country shall be complied with in regard to both
occupational safety and health, and environmental standards.
»
The distributor shall ensure compliance with the safety regulations specific to countries
where the equipment is installed and which are not covered by European Union regulations.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
The provision of PPE shall be the responsibility of the user, who shall ensure compliance in
the use of such equipment both by the wash and maintenance supervisors and in general by
personnel involved in running the business.
D A N G E R
»
Always make proper use of safety footwear and fluorescent jackets while working on the
facility. Always make use of chemical safety gloves and splash goggles when refilling
chemical products or when machine cleaning or maintenance products are used.
»
Where the jet wash operates in manual mode and/or under the close control of a maintenance
supervisor, this person shall wear, in addition to the Personal Protective Equipment
mentioned above, hearing protection, whenever the person is near the facility in question.
8
Summary of Contents for 4CA2000
Page 58: ... ...
