BUY-TIME MODE PAYMENT SYSTEM
NAYAX PAYMENT SYSTEM
The Codax system is payment method which uses codes. To enable the wash program, you must first acquire a
code from the wash facility office.
1
ENTER CODE
1
2
3
E
4
6
0
7
9
*
5
8
PSD-
C
ODAX
1)
The code acquired is then entered using the Codax system number
keys.
2) Validate the code with letter “E”. The display shows the time available
for the wash and the credit entered.
•
If no program has been activated within 30 seconds, the time available
will start counting down and the message "PRESS A PROGRAM
NOW" will be displayed.
2
SELECT WASH PROGRAM
1) Take the gun or lance out of holder.
2) Press the corresponding program number using the program selection
buttons; the wash bay will start working.
•
During the wash, the display shows the program in progress and the
time remaining for the wash.
3) Change the program by pressing the corresponding program button
again.
•
The display shows a warning when the time left is 10 seconds.
4)
When the wash is finished, leave the gun or the lance in their
corresponding holders.
3
STOP WASH
1) To stop the washing process, press STOP once.
•
When STOP is pressed, the wash stops but the time continues to
count down.
2) To resume the wash, press the button for the program you wish to
activate again. The message ‘TO CONTINUE, PRESS ANY BUTTON’
will be shown on the display.
•
The wash will continue until the time remaining runs out.
15
Summary of Contents for 4CA2000
Page 58: ... ...
